通風管道是風機與室外空氣間的連接管，其安裝非常重要，影響風機的使用效率。因此，有必要確保風扇和風管的安裝.風管與風管連接良好，保證風機正常使用。連接時應牢固固定，防止以后使用時排煙。那么通風管道安裝后應該如何連接？下面
濟南通風管道加工人員為您解說。
The ventilation duct is the connecting pipe between the fan and the outdoor air, and its installation is very important, which affects the use efficiency of the fan. Therefore, it is necessary to ensure the installation of the fan and air duct The air duct and air duct are well connected to ensure the normal use of the fan. The connection shall be firmly fixed to prevent smoke exhaust in future use. How should the ventilation pipe be connected after installation? Next, Jinan ventilation pipe processing personnel will explain for you.
1.卡箍連接：
1. Clamp connection:
主要用于連接鋼板圓形通風管和螺旋管。，每個部分的兩端都是肌腱，一端非常小。安裝時，沿氣流方向插入口，用鋼帶擰緊兩端，固定并擰緊耳環中間的螺栓。應注意這一過程，不影響油管的正常使用，確保安裝過程中空氣管道暢通，取得良好的效果。
It is mainly used to connect steel plate round vent pipe and spiral pipe. First of all, each part has tendons at both ends, and one end is very small. During installation, insert the hole along the air flow direction, tighten both ends with steel strip, and fix and tighten the bolt in the middle of the ear ring. Attention shall be paid to this process, which will not affect the normal use of the oil pipe, and ensure that the air pipe is unblocked during installation to achieve good results.
2.插入式連接：
2. Plug in connection:
主要用于矩形或圓形管道連接。連接氣管后，從兩側插入氣管，用鉚釘固定。雖然這種固定方法的使用相對有限，但安裝方法相對簡單，易于理解，可以節省施工時間，確保風管的正常使用。
It is mainly used for rectangular or circular pipe connection. After connecting the air pipe, insert the air pipe from both sides and fix it with rivets. Although the use of this fixing method is relatively limited, the installation method is relatively simple and easy to understand, which can save construction time and ensure the normal use of air duct.
3.插接件：
3. Connector:
主要用于方筒連接。安裝風管時，可在風管兩端插入不同形狀的鑲件，使其緊湊。
It is mainly used for square cylinder connection. When installing the air duct, insert inserts of different shapes at both ends of the air duct to make it compact.
4.軟管連接：
4. Hose connection:
主要用于連接風管和零件(如散熱器).靜壓箱側出風口等）。安裝時，將軟管的兩端插入連接管中，并用特殊的軟卡固定軟管。過濾介質的獨特設計不僅具有良好的通風性能，而且提高了有效過濾區的使用壽命和除塵效率。
It is mainly used to connect air duct and parts (such as radiator) Air outlet at static pressure box side, etc.). During installation, insert both ends of the hose into the connecting pipe and fix the hose with a special soft card. The unique design of the filter medium not only has good ventilation performance, but also improves the service life and dust removal efficiency of the effective filter area.
安裝時，請注意不要影響管道的質量，以確保連接過程的穩定性。此外，請注意管道的安裝方法，但不同的連接方法需要注意不同的內容，以確保管道的正常安裝。
During installation, be careful not to affect the quality of the pipe to ensure the stability of the connection process. In addition, please pay attention to the installation method of the pipeline, but different connection methods need to pay attention to different contents to ensure the normal installation of the pipeline.
That's all for the explanation of how to connect the ventilation pipes after installation. If you have any ideas, please come to our website http://www.shyrzs.com Consult!
上一篇：通風管道加工需要注意的4點事項
下一篇：購買劣質油煙凈化器會存在隱患
